Horizontal Autoclave (PLT-102)

APPLICATIONS OF HORIZONTAL AUTOCLAVE

Double walled Horizontal Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro- organisms It is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through.
Autoclave Horizontal is low cost options for general sterilization ideal tool for Laboratories, Hospitals, Nursing Homes, Agricultural R&D labs etc, Pharmaceutical, Food & Beverage Industries and Institutions.
Suitable for Sterilizing hospital dressings, linen, rubber, plastic goods, surgical instruments, glasswares, utensils etc.

Double walled unit horizontally mounted on a sturdy, heavy M.S. duly painted or Stainless steel tubular stand.
Chamber & Boiler (Steam Generator) are constructed from S.S. 304 Grade.
Lid (single piece door) made of stainless steel tightened by Radial Locking System.
Sealing of Lid by Neoprene Rubber Gasket
Chamber Insulated by Mineral/Glass Wool to minimise the heat losses and is covered by polished stainless steel sheet.
Fitted with Pressure Gauge, Spring Loaded Safety Valve.
Sterilizing pressure : 1.2 to 1.5 kg/cm2 (15 psi to 22psi)
Sterilizing Temperature up to 1340C
Hydraulically Tested up to 40 psi.
These Autoclaves work on the principle of downward displacement of air which is the most economical method of obtaining sterilization
Fitted with separate valves for injecting the steam into the main chamber.
Fitted with Automatic Vacuum Breaker to break the vacuum in case of formation of vacuum due to steam condensation.
Fitted with Automatic Low Water Level Cut-off Device for Prevention of Heaters.
Fitted with Automatic Pressure Control Switch to economizes power consumption by reducing frequent opening of the steam release valve. It cuts off the power supply to heaters when the set pressure is achieved and re-energizes the heating elements when pressure falls below the set point.
Fitted with Dial thermometer to indicate the inner chamber temperature.
Voltage: 220 Volts AC (50 Hz)

PARAMETERS	MODEL ACV-1	MODEL ACV-2	MODEL ACV-3	MODEL ACV-4	MODEL ACV-5	MODEL ACV-6
Inner Dimensions (Dia x Height)	250x450mm	300x500mm	350x550mm	450x600mm	550x750mm	1100x400mm
Inches Conversion	10 x 18	12 x 20	14 x 22	18 x 24	22 x 30	44 x 16
Capacity	22 ltrs	36 ltrs	50 ltrs	98 ltrs	152 ltrs	200 ltrs
Working Load	2.0 KW	2.0 KW	3.0 KW	6.0 KW	7.5 KW	9.0 KW
Pressure Gauge	0-30 psi
Working Pressure Gauge	10-20 psi
Gasket	Made of Neoprene Rubber
Sterilizing pressure	1.2 kgf / cm (15psi)at 121°c
Pressure Gauge	0-2.1 kgf / cm² (30 psi)
Operating pressure	From 15 to 20psi (Adjustable)
Inner Pressure Tank	Stainless Steel (SS-304)
Lid Quality	Heavy mild steel sheet lined with Stainless steel
Basket	Made of Stainless Steel
Lid Tightening	Radial Locking system worked by handle
Water Level Indicator	Fitted on the outer chamber
Boiler – Hydraulically Tested	Upto +40 psi
Accuracy	+ 3 psi
Safety Device	Spring Loaded Type
Water Draining System	Hand Operated Valve
Heating	BY ISI Marked Immersion Heaters
Steam & Vacuum Release	By Valve
Power Supply	220/230V AC, 50/60Hz

Present Pressure Operation	Automatic Switch Piezostat (Pressure Control Switch)
Heater Safety	Automatic cut-off Device
Pre-set Time Operation	By Mechanical / Digital Timers Analogue 0-60 minutes
Temperature Display	By Dial Type / Digital Temperature Indicators with LED display.
Temperature Recording	Thermograph with / without digital display – Circular Type
Dry Sterilization	Triple wall arrangement